Audi 80/90/Coupe

Since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
+ 1.2. Car identification
- 2. Engines, carburettors
   2.1.2. Removal and engine installation (5-cylinder models)
   2.1.3. Dismantling and assemblage of engines
   2.1.4. A head of the block of cylinders, the mechanism timing
   + 2.2. An engine electric equipment
   - 2.3. Carburettors
      + 2.3.1.2. Check and carburettor adjustment
      + 2.3.2. Carburettors Keihin
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. A steering
+ 12. A body, salon
+ 13. A central air
+ 14. An electric equipment


32ad0625

2.3. Carburettors

2.3.1. Carburettor Ecotronic (Pierburg 2EE)

2.3.1.1. The general description
THE GENERAL DATA

The carburettor 2 IT with working components

1. Safety locks
2. A gas rope
3. A bolt, 10 Н.м.
4. The carburettor 2 IT
5. A bolt, 13 Н.м.
6. A krepjashchaja lining under the carburettor
7. The temperature gauge, 20 Н.м.
8. The vacuum union for the hydraulic booster of brakes
9. The pipeline for a cooling liquid
10. A collector lining
11. A lining
12. A bolt, 25 Н.м.

13. A soaking up collector
14. A bolt, 20 Н.м.
15. The O-shaped ring
16. A heater of a bringing collector
17. A bolt, 10 Н.м.
18. The equipment for management of the carburettor
19. A connecting plug
20. A plug for connection of a probe of Ljambda
21. A probe of Ljambda, 50 Н.м.

The top part of the carburettor 2 IT
1. A ventilating tube поплавковой
Chambers
2. A ventilating strainer of the muffler
Flame (поплавковой chambers)
3. An enrichment tube at full loading
4. A bolt, 5 Н.м.
5. Заслонка start-up
6. A carburettor cover
7. A needle
8. The lining, is subject to obligatory replacement
9. A preliminary spray, 1 chamber
10. A preliminary spray, 2 chamber
11. A safety wedge
12. A fuel jet of idling
13. The main jet, 1 chamber
14. The main jet, 2 chamber
15. A stopper
16. An arm
17. A regulator of installation of a diaphragm
18. A fixing ring
19. The needle valve of a float
20. A float axis
21. A float
22. A float lining

The bottom part of the carburettor 2 IT
1. A stopper заглушки
2. The O-shaped ring
3. The filter
4. A regulator throttle заслонки
5. The ventilating valve
6. The valve of tap of air
7. The holder of a regulator throttle заслонки a gas rope
8. The return valve
9. A valve plate
10. A directing element
11. A valve spring
12. The bottom part of the carburettor
13. A heater of the valve of average loading
14. The persistent screw throttle заслонки, the chamber 1
15. The screw of adjustment WITH
16. A vacuum regulator of ignition,
The chamber 2
17. The lever of blocking throttle заслонки, the chamber 2
18. The connecting plug
19. A potentiometer throttle заслонки

The carburettor 2 IT in the disassembled condition

Specifications

Type – 2, 1.6 litres applied in engines with designation PР

 
The chamber 1П
The chamber 2
Diameter диффузора
22
26
The main jet
Х 105
Х 110
Jet air
Х 110
Х 105
Fuel jet of idling
Х 45
The channel of enrichment of a mix at full loading
0.4 mm
The raised speed of idling of the cold engine
1400 rpm
Speed of rotation of idling
750 rpm
The maintenance oxide carbon
0.6 %

The carburettor 2 is the carburettor of the overturned type, two-step with electronic adjustment. This carburettor has no traditional auxiliary systems of the main fuel system, for example, the equipment of work of start-up or the accelerating pump. Functions of these systems carry out two regulators: a position regulator заслонки and a regulator of installation of a throttle. Regulators receive electric impulses from a microprocessor control system which is placed behind the hiding place case.

The probe лямбда is in the forward muffler of system of an exhaust. It carries out maintenance gauging oxide carbon in exhaust gases and sends a corresponding signal (pressure) to a control system. Thanks to it the management equipment changes a parity of fuel and air which is soaked up in the carburettor, and thus оптимализирует burning conditions.