Audi 80/90/Coupe

Since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburettors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
- 7. Ignition system
   7.1.2. Specifications (4-cylinder models)
   7.1.3. Components of system of ignition for 5-cylinder models
   7.1.4. Specifications (5-cylinder models)
   7.1.5. The block of management CIS-E Motronic (the alarm block)
   7.1.6. A distributor rotor
   7.1.7. The ignition distributor (4-cylinder models)
   7.1.8. The ignition distributor (5-cylinder models)
   7.1.9. Components of system of ignition for 20-klapannyh models
   7.1.10. Specifications (20-klapannye models)
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. A steering
+ 12. A body, salon
+ 13. A central air
+ 14. An electric equipment


32ad0625

7.1.8. The ignition distributor (5-cylinder models)

Installation

PERFORMANCE ORDER
1) And – at the established engine – establish a flywheel in the top dead point – the cylinder 1 (it is specified by an arrow)
In – at the removed engine – establish a label on виброгасителе (pulley) opposite to a label on a belt cover (it is specified by an arrow)
2) level a label on an asterisk of a cam-shaft with a cover of a head of cylinders (it is specified by an arrow)
3) establish the distributor so that the rotor has been directed on a label for the cylinder 1 on a distributor casing (it is specified by an arrow)
4) clear a distributor cover before installation
5) check up it about cracks and soot traces as result искрения, if necessary replace
6) adjust a corner of an advancing of ignition

The prevention

The number of turns of idling, installation of a corner of an advancing of ignition and the maintenance WITH are interconnected and should be checked and be regulated together.