Audi 80/90/Coupe

Since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburettors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. A steering
- 12. A body, salon
   12.2. The central section of a guard
   12.3. A cowl rope
   12.4. A forward guard
   12.5. A forward wing
   12.6. Lock pins of a cowl, the rubber shock-absorber
   12.7. A cowl
   12.8. A gazonapolnennaja rack (models the Sedan)
   12.9. A luggage carrier cover
   12.10. A back door (Compartment model)
   12.11. A forward door, the bottom door loop
   12.12. Adjustment of a window and a bearing element of a door
   12.13. Window condensing stoppers, a window regulator
   12.14. The door lock
   12.15. Draught of lever transfer of the lock
   12.16. A rope of an internal door-lock
   12.17. A rotary clamp, an adjusting spring
   12.18. Adjustment of doors
   12.19. A bearing element of a door
   12.20. The central lock
   12.21. The pump with two modes of forcing
   12.22. The leading activator
   12.23. The activator of a back door
   12.24. The activator of a cover of a luggage carrier
   12.25. The activator of a cover of a fuel tank
   12.26. Door glass (Compartment model)
   12.27. Adjustment of a butt overlay (Compartment model)
   12.28. A skeleton of a back door, the bottom loop of a door
   12.29. A bearing element of the back door, a condensing stopper
   12.30. A rope, шарнирный the lever
   12.31. The door handle
   12.32. The holder of components of a door
   12.33. The hatch
   12.34. A bumper casing
   12.35. Hermetic sealing of a back bumper
   12.36. An extending clamp
   12.37. A forward spoiler / a lining of a niche of a wheel (Compartment model)
   12.38. The top overlay of a forward spoiler (Compartment model)
   12.39. A back spoiler / a lining of a niche of a wheel
   12.40. A back bumper (Compartment model)
   12.41. window raiser
   12.42. Internal furnish of a body
   12.43. Sitting
+ 13. A central air
+ 14. An electric equipment


32ad0625

12.5. A forward wing
THE GENERAL DATA

Forward wing, assemblage (Compartment model)
1. A nut
2. A self-cutting bolt with a washer, 8 Н.м.
3. A self-cutting bolt with a washer
4. A wing
5. An extending nut
6. A wing arm
7. A self-cutting bolt with a washer, 8 Н.м.
8. A washer
9. A condensing ring
10. A condensing lining

Forward wing, removal

PERFORMANCE ORDER
1) remove a forward bumper
2) remove a lining of a cavity of a wheel
3) remove condensing lining (marksman)

Installation

All components establish in the return to removal an order, in view of the following:

PERFORMANCE ORDER
1) establish a rivet of a basic arm of a cowl (the marksman
2) establish a rivet of a stopper of a door (the marksman
3) establish strips of a sealing cord, 1, 2 and a sheet lining with a bolt And on a stopper

1 = 480 mm at length and 7.0 mm in diameter

2 = 250 mm at length and 7.0 mm in diameter

Use sealing cord AKD 497 010 04 R10 or an equivalent, and compress it till the sizes of 7.0 mm in diameter.

Adjustment of a forward wing, cowl backlash

PERFORMANCE ORDER
1) ослабьте all bolts of a wing
2) having weakened bolts, adjust a backlash, moving a wing
3) having weakened bolts, adjust a backlash, moving a wing

And = 4.5 + 1.0 mm

The prevention

Numbers of details are intended only for the inquiry. For the latest information always address to your dealer.

The sealing cord will be necessary for compressing till the diameter in 7.0 mm