Audi 80/90/Coupe

Since 1986-1991 of release

Repair and car operation

Audi 80/90/Coupe
- 1.2. Car identification
   1. The maintenance instruction
   1.3. An arrangement of identification tablets
   1.4. The panel of devices
   - 1.5. Car service
      1.5.2. Seasonal change of type of fuel
      1.5.3. Petrol additives
      1.5.4. The latest news in the field of fuel
      1.5.5. A cowl
      1.5.6. An engine compartment
      + 1.5.7. Engine oil
      1.5.8. The oil filter of the engine
      + 1.5.9. Liquid automatic gearbox
      1.5.10. Oil manual transmission
      1.5.11. The air filter
      1.5.12. Spark plugs
      + 1.5.13. The hydraulic booster of a steering and the amplifier of brake system
      + 1.5.14. A brake liquid
      - 1.5.15. Cooling system Check of level of a cooling liquid An overheat Addition of a cooling liquid The fan of cooling of a radiator Car operation during the winter period
      + 1.5.16. Tanks for washers of a windscreen and headlights of forward light
      1.5.17. Разбрызгиватели
      1.5.18. Brushes of screen wipers
      + 1.5.19. Wheel Tyres /
   + 1.6. Independent service of the car
   + 1.7. Specifications
   1.8. Capacities
   1.9. The sizes
   1.10. Loadings
   1.11. The schedule of preventive servicing / of greasing of the car
+ 2. Engines, carburettors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. A steering
+ 12. A body, salon
+ 13. A central air
+ 14. An electric equipment

32ad0625 Addition of a cooling liquid

Muffle the engine and allow to it to cool down.

The prevention

Reduce risk ошпаривания a hot cooling liquid, following conforming to the rules:

 – If it is necessary for you to uncover a broad tank of a cooling liquid, wait, while the engine will cool down;
 – The cooling system is under pressure; will protect the face, hands and forearms, having covered a cover with the big piece of a thick matter not to be scalded by leaving steam or a liquid;
 – Accurately and slowly turn a cover on one turn to lower steam before completely uncovering.

Always add antifreeze and water in the ratio, designated on capacity the manufacturer of antifreeze.

The increase in the maintenance of antifreeze in a cooling liquid more than on 60 % not only is not economical, but also negatively affects engine cooling.

It is necessary to use only the qualitative antifreeze which is containing этиленгликоль and not containing phosphatic connections.

Use of the antifreeze which distinct from is recommended firm Audi, can cause corrosion of system of cooling that will lead to an overheat and engine damage.

The small amount of the antifreeze containing этиленгликоль and phosphatic connections, can be used only for small refuelling of system of cooling if you do not have antifreeze of the demanded mark.

Cold antifreeze and cold water it is necessary to fill in only when the engine also the cold.

After addition of a cooling liquid, allow to the engine to work in a mode of idling within several seconds.

Once again check up level of a cooling liquid. Add a cooling liquid if it is necessary.

The prevention

Do not overflow cooling system.

The excessive quantity of a cooling liquid will be merged through редукционный the valve in a broad tank when the engine will get warm.

Reliably twirl a cover of a broad tank after pouring of a cooling liquid.