Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburettors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. A steering
- 12. A body, salon
12.2. The central section of a guard
12.3. A cowl rope
12.4. A forward guard
12.5. A forward wing
12.6. Lock pins of a cowl, the rubber shock-absorber
12.7. A cowl
12.8. A gazonapolnennaja rack (models the Sedan)
12.9. A luggage carrier cover
12.10. A back door (Compartment model)
12.11. A forward door, the bottom door loop
12.12. Adjustment of a window and a bearing element of a door
12.13. Window condensing stoppers, a window regulator
12.14. The door lock
12.15. Draught of lever transfer of the lock
12.16. A rope of an internal door-lock
12.17. A rotary clamp, an adjusting spring
12.18. Adjustment of doors
12.19. A bearing element of a door
12.20. The central lock
12.21. The pump with two modes of forcing
12.22. The leading activator
12.23. The activator of a back door
12.24. The activator of a cover of a luggage carrier
12.25. The activator of a cover of a fuel tank
12.26. Door glass (Compartment model)
12.27. Adjustment of a butt overlay (Compartment model)
12.28. A skeleton of a back door, the bottom loop of a door
12.29. A bearing element of the back door, a condensing stopper
12.30. A rope, шарнирный the lever
12.31. The door handle
12.32. The holder of components of a door
12.33. The hatch
12.34. A bumper casing
12.35. Hermetic sealing of a back bumper
12.36. An extending clamp
12.37. A forward spoiler / a lining of a niche of a wheel (Compartment model)
12.38. The top overlay of a forward spoiler (Compartment model)
12.39. A back spoiler / a lining of a niche of a wheel
12.40. A back bumper (Compartment model)
12.41. window raiser
12.42. Internal furnish of a body
12.43. Sitting
+ 13. A central air
+ 14. An electric equipment
|
Luggage carrier cover, the hinge, rack (models the Sedan)
1. The terminator of a cover of a luggage carrier
2. The sharnirnyj terminator, in the closed position
3. An izoljatsionnaja washer
4. A combinational bolt, 21 Н.м. |
5. A fixing clip
6. A gazonapolnennaja rack
7. A shestigrannaja nut, 21 Н.м. |
Luggage carrier cover, adjusting backlash
Placing of the sizes
The size
|
Adjustment
|
And = 4.4 + 1.0 mm
| Regulate the hinge |
b = 6.5 + 1.0 mm
| Adjustment it is carried out at change of the triangular panel |
With = 9.9 + 1.0 mm
| It is regulated by displacement of stoplights |
d = 8.0 + 1.0 mm
|
е = 9.75 + 1.0 mm
| Adjustment is made on запорной to a plate of a cover of a luggage carrier |
The zapornyj mechanism of a cover of a luggage carrier in assemblage (model the Sedan)
1. A sealing ring for the lock cylinder
2. Draught of lever transfer
Adjustment: place the lock and the lock cylinder so that in draught рачажной transfers were not a free wheeling; fix draught of lever transfer on the lock and fix
3. The jointed plug
4. A spring washer
5. A bolt with шестигранной a head
6 Н.м.
6. A spring pin
7. The clown
Remove cautiously not to lose a spring ball
8. A bolt with шестигранной a head
3 Н.м.
9. A washer
10. A zapornaja plate of a door-lock |
11. A sealant, tear off a lining and paste on a shock plate of a door-lock
12. A counternut, 3 Н.м.
13. The lock
14. A sealant, tear off a lining and paste on the lock
15. The lock cylinder
For removal pull out a spring pin, remove the clown and by means of a key squeeze out the lock cylinder
16. A sealing ring
17. The lock
18. A spring
19. A spring ball, cover with its greasing before installation in the lock cylinder |
|
|